Prowill Is900 User Manual
DOWNLOAD ===> https://urluss.com/2tuGSV
How to Use the Prowill is900 Barcode Scanner
The Prowill is900 is a wireless barcode scanner that can read various types of barcodes, such as UPC, EAN, Code 39, Code 128, QR Code, and more. It can communicate with a cradle or a host device via Bluetooth or USB interface. It has a built-in rechargeable battery that can last for up to 10 hours of continuous scanning. In this article, we will show you how to use the Prowill is900 barcode scanner and some of its features.
Getting Started
Before using the Prowill is900 barcode scanner, you need to charge it fully by placing it on the cradle or connecting it to a power source with a USB cable. The LED indicator on the scanner will turn red when charging and green when fully charged. You also need to pair the scanner with the cradle or the host device that you want to use. To pair the scanner with the cradle, press and hold the trigger button on the scanner for 3 seconds until you hear a beep and see a blue LED flash. Then place the scanner on the cradle and wait for another beep and a solid blue LED. To pair the scanner with a host device, scan the Bluetooth pairing barcode from the user manual[^1^] [^2^] and follow the instructions on your device.
Scanning Barcodes
To scan barcodes with the Prowill is900 barcode scanner, aim the scanner at the barcode and press the trigger button. You will hear a beep and see a green LED flash when a barcode is successfully scanned. The scanned data will be transmitted to the cradle or the host device automatically. You can also scan barcodes in batch mode by pressing and holding the function button on the scanner for 3 seconds until you hear two beeps. In batch mode, the scanned data will be stored in the scanner's memory and can be uploaded later by scanning the upload barcode from the user manual[^1^] [^2^].
Configuring Settings
You can configure various settings of the Prowill is900 barcode scanner by scanning programming barcodes from the user manual[^1^] [^2^]. For example, you can change the beep volume, the LED brightness, the scan mode, the data format, and more. You can also reset the scanner to its default settings by scanning the factory default barcode from the user manual[^1^] [^2^].
Troubleshooting
If you encounter any problems with the Prowill is900 barcode scanner, you can refer to the troubleshooting section of the user manual[^1^] [^2^] for some possible solutions. Some common issues are:
The scanner does not turn on or charge: Check if the battery is inserted correctly and if there is any damage to the battery or the power cord. Replace them if necessary.
The scanner does not scan barcodes: Check if the barcode is printed clearly and if there is enough light. Adjust the distance and angle of the scanner. Make sure you are using the correct scan mode for your barcode type.
The scanner does not communicate with the cradle or host device: Check if they are paired correctly and if they are within range. Make sure there is no interference from other wireless devices. Re-pair them if necessary.
The scanned data is incorrect or incomplete: Check if you have configured the data format correctly and if there is any damage to
the barcode. Scan another barcode to verify.
If you still cannot solve your problem, contact your dealer or Prowill customer service for further assistance. ec8f644aee