Official Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T813 Stock Rom !FREE!
Click Here ->>->>->> https://ssurll.com/2tw7L1
How to Install Official Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T813 Stock Rom
If you want to restore your Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T813 to its original factory settings, you can use the official stock firmware provided by Samsung. This will help you fix any software issues, such as bootloops, crashes, or glitches, that you may encounter on your device. In this article, we will show you how to download and install the official Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T813 stock rom using Odin flash tool.
What You Need
A Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T813 device with at least 50% battery charge.
A Windows PC and a USB cable.
The latest Samsung USB drivers installed on your PC. You can download them from here.
The official Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T813 stock firmware file. You can download it from here. Make sure to choose the correct region and version for your device.
The Odin flash tool. You can download it from here.
How to Install Official Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T813 Stock Rom
Extract the downloaded stock firmware file to a folder on your PC.
Extract the downloaded Odin zip file to a folder on your PC.
Run the Odin.exe file as administrator.
Power off your Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T813 device and boot it into download mode by pressing and holding the Volume Down, Home, and Power buttons simultaneously for a few seconds. When you see a warning screen, press Volume Up to continue.
Connect your device to your PC using the USB cable. Odin should recognize your device and show a blue or green box in the ID:COM section.
Click on the AP button in Odin and browse to the folder where you extracted the stock firmware file. Select the file that ends with .tar.md5 extension and click Open.
Make sure that only Auto Reboot and F. Reset Time options are checked in Odin. Do not check any other options or change any settings.
Click on the Start button in Odin to begin the flashing process. Do not disconnect your device or interrupt the process until it is finished.
When the flashing process is completed, Odin will show a green PASS message and your device will reboot automatically.
Disconnect your device from your PC and wait for it to boot up normally.
Congratulations! You have successfully installed the official Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T813 stock rom on your device. You can now enjoy the original features and performance of your device. aa16f39245
